Description
Warranty, Return & Exchange Policy
Shipping Info

Beaver Close Headroom Geared Girder Trolleys are used for applications where reduced headroom is required and are suited for heavier loads, higher suspension levels, or high use applications.

The units suit varying flange widths up to a maximum of 350mm with the simple addition or subtraction of spacers or nuts on a suspension pin

These girder trolleys are lightweight, despite their robust all-steel construction and have been operationally tested to 150% of their rated capacity.

Note:-Beaver Close Headroom Geared Trolleys are not designed for passenger elevator applications and must not be used for this purpose. Selection and calculation of the proper beam construction is the responsibility of the user.

Features:

Fully adjustable
Hand chain features a special corrosion resistance zinc dichromate (gold) finish
Anti-tilt blocks fitted as standard for additional safety
Colour coded to match international WLL lifting standards
Stainless steel ID plate for traceability

Approved Standards:

Complies to AS 1418.2

Product Code	Rated Capacity	Colour Code	Proof Load	Minimum Radius Curve	Net Weight	Q (mm)
522005S	0.5t	White	7.35kN	0.8m	6.5kg	35.5
522010S	1t	Violet	14.71kN	1m	10.5kg	41
522015S	1.5t	Orange	22.06kN	1m	17.5kg	43
522020S	2t	Green	29.42kN	1.1m	17.5kg	48
522030S	3t	Yellow	44.13kN	1.3m	27kg	54
522050S	5t	Red	61.29kN	1.4m	41kg	69

Each Beaver girder trolley has an individual serial number stamped on the stainless steel identification plate. This number coincides directly to the test certificate of the product (which is provided), for quick and easy tracing and reference. These products are also operationally tested to 150% of its rated capacity.

Product Code	Rated Capacity	A	B	C	D	E	F
522005S	0.5t	245mm	199mm	187mm	34mm	30mm	1.5-3mm
522010S	1t	311mm	246mm	222mm	40mm	38mm	1.5-3mm
522015S	1.5t	338mm	260mm	238mm	45mm	38mm	1.5-3mm
522020S	2t	327mm	276mm	263mm	52mm	38mm	1.5-3mm
522030S	3t	445mm	332mm	309mm	58mm	40mm	1.5-3mm
522050S	5t	457mm	377mm	353mm	64mm	42mm	2-3.5mm
	Rated Capacity	G	H	I	J	L1	M
522005S	0.5t	24mm	105mm	79mm	55mm	100mm	50-152mm
522010S	1t	30mm	125mm	95mm	68mm	120mm	64-203mm
522015S	1.5t	33mm	134mm	102mm	74mm	125mm	74-203mm
522020S	2t	36mm	150mm	108mm	80mm	132mm	88-203mm
522030S	3t	42mm	171mm	131mm	100mm	155mm	100-305mm
522050S	5t	48mm	196mm	144mm	110mm	168mm	114-305mm

For more information on our materials handling range, please contact our Customer Care team.

Warranty:

Returns will be accepted for faulty or defective goods and any other non-excludable obligations of Bunzl Safety set out in the Trade Practices Act 1974 or similar State and Territory legislation.

Returns are subject to customer following Bunzl Safety’s recommended care and maintenance instructions which can be found on the garments swing tag. Bunzl Safety found to be faulty will be replaced at no cost.

Items that are sourced from 3rd party distributors will carry their own manufacturer’s warranty.

Returns/Exchange Policy:

Bunzl Safety to be notified within 7 days from receipt of order for any products that are to be returned/exchanged.

Before any items are returned the following steps need to be actioned:

Complete Return Authorisation Form (RAF)
Obtain a Return Authorisation Number
Forward the garments with the (RAF) form to the specified Worksense branch
Goods will be inspected and credited off your account once approved

Please Note: Bunzl Safety must approve all returns before they are forwarded back to the designated branch. These authorised returns must be freight prepaid and will only be accepted if they are in a saleable condition. Products specifically purchased, manufactured, machined or cut to size or to your company’s specification are not returnable unless prior approval has been given.