Description
Warranty, Return & Exchange Policy
Shipping Info

Beaver Geared Girder Trolleys are suited for heavier loads, higher suspension levels, or high use applications.

The units suit varying flange widths up to a maximum of 350mm with the simple addition or subtraction of spacers or nuts on a suspension pin

These girder trolleys are lightweight, despite their robust all-steel construction and have been operationally tested to 150% of their rated capacity.

Note:-Beaver Geared Girder Trolleys are not designed for passenger elevator applications and must not be used for this purpose. Selection and calculation of the proper beam construction is the responsibility of the user.

Features:

Fully adjustable
Hand chain features a special corrosion resistance zinc dichromate (gold) finish
Anti-tilt blocks fitted as standard for additional safety
Colour coded to match international WLL lifting standards
Stainless steel ID plate for traceability

Approved Standards:

Complies to AS 1418.2

Product Code	Rated Capacity	Colour Code	Proof Load	Minimum Radius Curve	Net Weight
523010S	1t	Violet	14.71kN	1m	14.5kg
523020S	2t	Green	29.42kN	1.1m	21.5kg
523030S	3t	Yellow	44.13kN	1.3m	31kg
523050S	5t	Red	61.29kN	1.4m	46kg
523100S	10t	Orange	122.58kN	2m	75kg
523200S	20t	Orange	245.17kN	3.5m	172kg

Each Beaver girder trolley has an individual serial number stamped on the stainless steel identification plate. This number coincides directly to the test certificate of the product (which is provided), for quick and easy tracing and reference. These products are also operationally tested to 150% of its rated capacity.

Product Code	Rated Capacity	A	B	C	D	E	F	G
523010S	1t	338mm	246mm	222mm	40mm	38mm	1.5-3mm	30mm
523020S	2t	349mm	276mm	263mm	52mm	38mm	1.5-3mm	36mm
523030S	3t	464mm	332mm	309mm	58mm	40mm	1.5-3mm	42mm
523050S	5t	476mm	377mm	353mm	64mm	42mm	2-3.5mm	48mm
523100S	10t	510mm	424mm	396mm	64mm	45mm	2-3.5mm	48mm
523200S	20t	600mm	555mm	498mm	75mm	58mm	2-3.5mm	55mm
	Rated Capacity	H	I	J	L1	L2	L3	M
523010S	1t	125mm	95mm	68mm	120mm	23mm	8mm	64-203mm
523020S	2t	150mm	108mm	80mm	132mm	26mm	8mm	88-203mm
523030S	3t	171mm	131mm	100mm	155mm	29mm	10mm	100-305mm
523050S	5t	186mm	144mm	110mm	168mm	35mm	10mm	114-305mm
523100S	10t	190mm	176mm	136mm	200mm	52mm	25mm	124-305mm
523200S	20t	233mm	226mm	175mm	272mm	78mm	58mm	136-305mm

For more information on our materials handling range, please contact our Customer Care team.

Warranty:

Returns will be accepted for faulty or defective goods and any other non-excludable obligations of Bunzl Safety set out in the Trade Practices Act 1974 or similar State and Territory legislation.

Returns are subject to customer following Bunzl Safety’s recommended care and maintenance instructions which can be found on the garments swing tag. Bunzl Safety found to be faulty will be replaced at no cost.

Items that are sourced from 3rd party distributors will carry their own manufacturer’s warranty.

Returns/Exchange Policy:

Bunzl Safety to be notified within 7 days from receipt of order for any products that are to be returned/exchanged.

Before any items are returned the following steps need to be actioned:

Complete Return Authorisation Form (RAF)
Obtain a Return Authorisation Number
Forward the garments with the (RAF) form to the specified Worksense branch
Goods will be inspected and credited off your account once approved

Please Note: Bunzl Safety must approve all returns before they are forwarded back to the designated branch. These authorised returns must be freight prepaid and will only be accepted if they are in a saleable condition. Products specifically purchased, manufactured, machined or cut to size or to your company’s specification are not returnable unless prior approval has been given.