page
About Us
1800 967 573
1800 967 573

Beaver Close Headroom Push Girder Trolleys
Unit Description: Each
  • Description
  • Warranty, Return & Exchange Policy
  • Shipping Info

Beaver Close Headroom Push Girder Trolleys Beaver push girder trolleys are used for applications where reduced headroom is required.  The units suit varying flange widths up to a maximum of 350mm with the simple addition or subtraction of spacers or nuts on a suspension pin and are ideally suited to Beaver 3S Chain Blocks. 

These girder trolleys are lightweight, despite their robust all-steel construction and have been operationally tested to 150% of their rated capacity.

Note:-Beaver push close coupled trolleys are not designed for passenger elevator applications and must not be used for this purpose. Selection and calculation of the proper beam construction is the responsibility of the user. 

Features:
  • Fully adjustable
  • Anti-tilt blocks fitted as standard for additional safety
  • Stainless steel ID plate for traceability
Approved Standards:
  • Complies to AS 1418.2
Product Code Rated Capacity Colour Code Proof Load Minimum Radius Curve Net Weight
522010SC 1t Violet 14.71kN 0.9m 23.5kg
522020SC 2t Green 29.42kN 1m 39kg
522030SC 3t Yellow 44.13kN 1.2m 59.5kg

Each Beaver girder trolley has an individual serial number stamped on the stainless steel identification plate. This number coincides directly to the test certificate of the product (which is provided), for quick and easy tracing and reference. These products are also operationally tested to 150% of its rated capacity.

Product Code Rated Capacity A B C H S F M
522010SC 1t 303mm 246mm 164mm 385mm 38mm 1.5-3mm 64-203mm
522020SC 2t 317mm 276mm 183mm 480mm 38mm 1.5-3mm 88-203mm
522030SC 3t 435mm 332mm 224mm 520mm 40mm 1.5-3mm 100-305mm

For more information on our materials handling range, please contact our Customer Care team.

Warranty:

Returns will be accepted for faulty or defective goods and any other non-excludable obligations of Bunzl Safety set out in the Trade Practices Act 1974 or similar State and Territory legislation.

Returns are subject to customer following Bunzl Safety’s recommended care and maintenance instructions which can be found on the garments swing tag. Bunzl Safety found to be faulty will be replaced at no cost.

Items that are sourced from 3rd party distributors will carry their own manufacturer’s warranty.

Returns/Exchange Policy:

Bunzl Safety to be notified within 7 days from receipt of order for any products that are to be returned/exchanged.

Before any items are returned the following steps need to be actioned:

  • Complete Return Authorisation Form (RAF)
  • Obtain a Return Authorisation Number
  • Forward the garments with the (RAF) form to the specified Worksense branch
  • Goods will be inspected and credited off your account once approved

Please Note: Bunzl Safety must approve all returns before they are forwarded back to the designated branch. These authorised returns must be freight prepaid and will only be accepted if they are in a saleable condition. Products specifically purchased, manufactured, machined or cut to size or to your company’s specification are not returnable unless prior approval has been given.

Shipping is free for orders over $300 ex GST. All our products are despatched from our warehouses located throughout Australia.

Orders being delivered throughout Australia have a delivery charge of $15 ex GST. This will be confirmed at checkout.

For overseas orders, please send your enquiry to customercare@bunzlsafety.com.au

Please note that the metric system is used for all forms of measurement for this product.

Related Products

Log In To View
Your Prices

Visa Logo Mastercard Logo
About Bunzl Safety and Lifting

Bunzl Safety and Lifting offers an integrated approach to the selection, supply, service, and replacement of safety products, resulting in our ability to manage the complete life cycle of your personal and workplace safety requirements. Bunzl Safety and Lifting is a leading manufacturer of safety products, we provide the very best in workwear, corporate wear, PPE, footwear, materials handling, load restraint, and recovery,height safety, and site safety. We are also a leading supplier of some of the best industrial safety brands on the market, including Mack, Ninja, Contego, Boomerang, Beaver, B-Safe, WS Workwear, Frontier, Black Rat, Robertsons, 3M, Honeywell, Ansell, Bolle Safety, DuPont, Donaghys, MSA, Moldex, Steel Blue, Oliver, uvex, Sqwincher, MaxiFlex, DNC Workwear, Mayo Hardware, Gunnebo Industries, Skylotech and Blundstone. We also offer a range of services including product specialisation and consolidation, custom embroidery and branding, lifting equipment and inspections, NATA Accredited testing and services, height safety installed systems and training, managed inventory, eCommerce and digital solutions, clothing fitouts and yearly uniform issues, ethical sourcing, Indigenous Engagement, and environmental responsibility. We have an Australia-wide network of branches that ensures fast shipping across the country.

Bunzl Brands & Operations Pty Ltd (BBO) located at 55 Sarah Andrews Close Erskine Park NSW 2579 quality scope covers: manufacturing, importing, wholesaling, repairing and testing of lifting, rigging equipment, winches, hoists and materials handling products. The manufacture of synthetic slings and webbing products including load restraint and height safety equipment. Manufacture, import, wholesale and distribution of PPE products, workwear and hand tools. Design and development of products and services and the provision of mechanical testing services.