Description
Warranty, Return & Exchange Policy
Shipping Info

Beaver Hot Dipped Galvanised Screw Pin Bow Shackles are rated shackles used mainly for non-permanent applications.

Grade S shackles are recommended where a high strength to weight ratio is required, therefore making them ideal for lifting, towing, and 4WD applications.

Product Features:

Supplied in handy pails
Hot dip galvanised for corrosion protection.
Suitable for lifting & towing applications.
Marked with WLL, quality grade, size, batch ID / date of manufacture
Proof tested to the Australian Standard
Test certificates available on request

Approved Standards:

Complies to AS 2741

Product Code	Size	WLL	Bucket Capacity	QTY per Bucket	Bucket Weight
242305P	5mm x 6mm	0.33t	2L	100	2.7kg
242306P	6mm x 8mm	0.5t	2L	100	3kg
242308P	8mm x 10mm	0.75t	2L	50	4.3kg
242310P	10mm x 11mm	1.0	2L	30	4.63kg
242311P	11mm x 13mm	1.5t	2L	20	4.44kg
242313P	13mm x 16mm	2t	2L	14	4.62kg
242316P	16mm x 19mm	3.2t	5L	20	12.4kg
242319P	19mm x 22mm	4.7t	5L	10	10.7kg
242322P	22mm x 25mm	6.5t	5L	8	13.12kg
242325P	25mm x 29mm	8.5t	5L	4	9.2kg

Please note that all dimensions are nominal. Actual dimensions fall within the tolerances of AS 2741.

Product Code	Size	Diameter	Pin Diameter (D)	Inside Width (w)	Width of Bow (B)	Inside Length (L)	Diameter Boss (e)
242305P	5mm x 6mm	5mm	6mm	10mm	15mm	22mm	14mm
242306P	6mm x 8mm	6mm	8mm	12mm	20mm	29mm	17mm
242308P	8mm x 10mm	8mm	10mm	13mm	21mm	31mm	21mm
242310P	10mm x 11mm	10mm	11mm	17mm	26mm	37mm	25mm
242311P	11mm x 13mm	11mm	13mm	18mm	29mm	43mm	27mm
242313P	13mm x 16mm	13mm	16mm	21mm	33mm	48mm	33mm
242316P	16mm x 19mm	16mm	19mm	27mm	43mm	61mm	40mm
242319P	19mm x 22mm	19mm	22mm	32mm	51mm	72mm	48mm
242322P	22mm x 25mm	22mm	25mm	37mm	58mm	34mm	54mm
242325P	25mm x 29mm	25mm	29mm	43mm	68mm	95mm	60mm

For more information on our materials handling range, please contact our Customer Care team.

Warranty:

Returns will be accepted for faulty or defective goods and any other non-excludable obligations of Bunzl Safety set out in the Trade Practices Act 1974 or similar State and Territory legislation.

Returns are subject to customer following Bunzl Safety’s recommended care and maintenance instructions which can be found on the garments swing tag. Bunzl Safety found to be faulty will be replaced at no cost.

Items that are sourced from 3rd party distributors will carry their own manufacturer’s warranty.

Returns/Exchange Policy:

Bunzl Safety to be notified within 7 days from receipt of order for any products that are to be returned/exchanged.

Before any items are returned the following steps need to be actioned:

Complete Return Authorisation Form (RAF)
Obtain a Return Authorisation Number
Forward the garments with the (RAF) form to the specified Worksense branch
Goods will be inspected and credited off your account once approved

Please Note: Bunzl Safety must approve all returns before they are forwarded back to the designated branch. These authorised returns must be freight prepaid and will only be accepted if they are in a saleable condition. Products specifically purchased, manufactured, machined or cut to size or to your company’s specification are not returnable unless prior approval has been given.