Description
Warranty, Return & Exchange Policy
Shipping Info

The Beaver Single Phase Electric Winch is ideal for use as a fixed boat ramp winch or for trades who need to haul loads, cables, or other equipment. They are easy to set up and operate.

Note:- No low voltage controls

Product Features:

240V industrial motor
Heavy duty construction and quality gear box
24V, IP65 pendant control
Emergency stop function
Cast steel foot mountings
Enclosed drum flanges to prevent rope becoming trapped between drum and support steel plates

Approved Standards:

Complies to AS1418.2 Section 8

Product Code	Rated Capacity	Speed	Motor Power	% ED	Effective Pull Height	Wire Rope Diameter x Length	Weight
BPL1025	0.25t	10-15m/min	1.0HP	25	29m	6mm x 30mm	40kg
BPL1030	0.3t	10-15m/min	1.5HP	25	29m	7mm x 30mm	49kg

The connection of the wire rope to the winch drump is via set screw, to ensure rope retention.

Rated Capacity	A	B	C	D	E	F
0.25t	4mm x 10.5D	142mm	142mm	525mm	210mm	246mm
0.3t	4mm x 10.5D	172mm	142mm	540mm	210mm	246mm

For more information on our materials handling range, please contact our Customer Care team.

Warranty:

Returns will be accepted for faulty or defective goods and any other non-excludable obligations of Bunzl Safety set out in the Trade Practices Act 1974 or similar State and Territory legislation.

Returns are subject to customer following Bunzl Safety’s recommended care and maintenance instructions which can be found on the garments swing tag. Bunzl Safety found to be faulty will be replaced at no cost.

Items that are sourced from 3rd party distributors will carry their own manufacturer’s warranty.

Returns/Exchange Policy:

Bunzl Safety to be notified within 7 days from receipt of order for any products that are to be returned/exchanged.

Before any items are returned the following steps need to be actioned:

Complete Return Authorisation Form (RAF)
Obtain a Return Authorisation Number
Forward the garments with the (RAF) form to the specified Worksense branch
Goods will be inspected and credited off your account once approved

Please Note: Bunzl Safety must approve all returns before they are forwarded back to the designated branch. These authorised returns must be freight prepaid and will only be accepted if they are in a saleable condition. Products specifically purchased, manufactured, machined or cut to size or to your company’s specification are not returnable unless prior approval has been given.