page
  • Choosing the right Protective Coveralls
Choosing the right disposable protective coverall is now more important than ever, and while we recommend looking at detailed product literature on what the coverall will and will not protect you against, there are some basic things to consider.

As a guide only, the process of choosing the right coverall starts with answering various questions about contaminants (hazardous or not) and work environments. Many factors can lead to different coveralls for the same application or job. We recommend considering the below steps before you choose your protective coverall:

Step 1: Conduct a detailed assessment of the work environment and the nature of the hazards including consideration of the following:
  • Physical state of contaminant
  • Form of contaminant (chemical concentration/particle size)
  • Type of exposure
  • Working environment (temperature, humidity)
  • What kind of job is going to be performed
  • What other PPE will be used with the coverall
  • Additional risks (for example: electrostatic charge, infective agents, nuclear particles)
Step 2: Determine the degree of exposure and minimum levels of protection needed.

Based on the level of protection they provide disposable coveralls are classified into six categories:

Step 3: Assess Hazard Toxicity, and short-term and long-term exposure.
Consider if the protective coverall has been tested against a given hazard and how it performs. Also refer to permeation data of a coverall which means that the coverall was tested against a specific hazard/toxic substance. Not all coveralls are the same, even if they are the same “type”. It is all about how it performs against a given hazard or chemical substance.

Step 4: Consider the comfort of the wearer.
Most Type 5/6 protective coveralls are made from either SMS (Spunbond Meltblown Spunbond fabric) or Microporous material, and although they both offer the same protection level, selection may differ in terms of comfort, breathability and even application. For example, SMS fabric generally is more breathable than other coverall fabrics and may be more suitable in hotter environments. MP, or microporous laminated coveralls on the other hand, may provide a more suitable barrier to liquid splashes as it offers higher tensile strength and a more effective liquid barrier as a result.

Step 5: Ensure proper training - on how to don, adjust, and remove a protective coverall is provided to wearers.


Step 6: Fit Test. All PPE should be fit tested for size and its effectiveness to protect the wearer.

Frontier Protective Disposable Coveralls Range
Frontier coveralls have recently been re-designed with improved comfort and durability in mind. The range consists of SPP (polypropylene) for non-hazardous applications, SMS, and Microporous coveralls in varying degrees of protection up to Type 4/5/6, and with coloured options available in the Frontier SMS Type 5/6 Coverall.

Other features of the Frontier Type 4/5/6 and Type 5/6 Coveralls include two-way zippers and protective flaps for added protection; low linting fabric (for Microporous only); as well as comfortable elasticised wrists, ankles, and waists.

Learn More or Shop the Frontier Coverall range now!

Note: If unsure, it is important to discuss your protection requirements with a product expert prior to purchasing disposable coveralls, as statutory and/or regulatory requirements may apply in your workplace.

Shop Now

 

Visa Logo Mastercard Logo
About Bunzl Safety and Lifting

Bunzl Safety and Lifting offers an integrated approach to the selection, supply, service, and replacement of safety products, resulting in our ability to manage the complete life cycle of your personal and workplace safety requirements. Bunzl Safety and Lifting is a leading manufacturer of safety products, we provide the very best in workwear, corporate wear, PPE, footwear, materials handling, load restraint, and recovery,height safety, and site safety. We are also a leading supplier of some of the best industrial safety brands on the market, including Mack, Ninja, Contego, Boomerang, Beaver, B-Safe, WS Workwear, Frontier, Black Rat, Robertsons, 3M, Honeywell, Ansell, Bolle Safety, DuPont, Donaghys, MSA, Moldex, Steel Blue, Oliver, uvex, Sqwincher, MaxiFlex, DNC Workwear, Mayo Hardware, Gunnebo Industries, Skylotech and Blundstone. We also offer a range of services including product specialisation and consolidation, custom embroidery and branding, lifting equipment and inspections, NATA Accredited testing and services, height safety installed systems and training, managed inventory, eCommerce and digital solutions, clothing fitouts and yearly uniform issues, ethical sourcing, Indigenous Engagement, and environmental responsibility. We have an Australia-wide network of branches that ensures fast shipping across the country.

Bunzl Brands & Operations Pty Ltd (BBO) located at 55 Sarah Andrews Close Erskine Park NSW 2579 quality scope covers: manufacturing, importing, wholesaling, repairing and testing of lifting, rigging equipment, winches, hoists and materials handling products. The manufacture of synthetic slings and webbing products including load restraint and height safety equipment. Manufacture, import, wholesale and distribution of PPE products, workwear and hand tools. Design and development of products and services and the provision of mechanical testing services.